How To Cut the GlowDog LED Dog Collar

1. Turn on the Lights

   Switch on the GlowDog collar lights to see where the breakpoints are, which will help you determine the best place to cut.

2. Identify the Cutting Point

   Look at the collar while illuminated and identify the midpoint between two lights. This is where you’ll make your cut.

3. Remove the End Cap

   Locate the end cap on the collar and carefully pop it off. It may be easier to put on than to remove.

4. Confirm the Cutting Point

   Turn the collar lights on again to double-check the cutting point. Ensure you have accurately marked where you intend to cut.

5. Turn Off the Lights

   Switch off the collar lights once you have confirmed the cutting point.

6. Cut the Collar

   Cut the collar at the marked point using scissors with some force to ensure a clean cut.

7. Reattach the End Cap

   Take the end cap you previously removed and reattach it to the freshly cut end of the collar. You may need to use some strength to secure it properly.

8. Test the Collar

   Turn the collar lights on again to ensure it functions correctly after the cut.

Your GlowDog LED collar is now cut to the correct size and ready for use. If you have any issues, contact support.